|
|
machinery
for sale services
machinery
for sale services |
|
Tissue machine 2100 mm
Yankee-Tissue Machine Make : BELOIT Type : Suction-Breast-Roll-Fourdrinier
installation of suction breast roll 1998 new QCS from Honeywell Measurex
Max. sheet width at Pope reel : 2100 mm
Capacity : 30 t/day +
Max. operation speed : 900 m/min
Design speed : 1000 m/min
Product range : napkins, white and deep colour tone Basis weight range : 15 – 30
g/m?
Drive side in paper run direction : right
Raw material : Virgin Pulp
Drive Voltage : 500 V
Consumption Data : Steam app. 2.5 t/t. Power app. 800 kWh/t. Fresh Water app. 10
m?/t.
Scope of equipment: Stock Preparation 1 Pulper Conveyor Belt, including drive 1 High-Consistency Cleaner, make BLACK CLAWSON, including drive 1 Double Disc Refiner, make SUNDS-DEFIBRATOR, type CONFLO J01, including drive 2 Deflaker, make ESCHER WYSS, type Gr.1, including drive 1 Disc-Filter, make BELOIT, type Polydisc, with 13 discs and 15.5 m² filter area. including drive Including all pipes, valves, pumps and instruments directly connected to the a.m. equipment.
Approach Flow System Complete approach flow system from outlet of machine chest
to inlet of headbox including 2 centrifugal cleaners 2 pressure screens, make
BLACK CLAWSON, type Selectifier 1 fan pump with drive. Including all stainless
steel pipes, valves and instruments.
Vacuum System
Complete vacuum system, including 3 vacuum fans, installed as cascade, with max.
137.3 m?/min and 3.6 m water column, separators, all stainless steel pipes,
pumps, valves and instruments
Paper Machine 1 Headbox, pressurized type, with manual cross profile adjustment, inside stainless steel polished 1 Wire part, cantilevered, made of fabricated steel, partly clad with stainless steel, including suction breast roll, all dewatering elements, wire drive roll, pneumatic wire guide, wire stretcher, high and low pressure cleaning showers. 1 Press part including 1 suction press roll 614 mm diameter with shell made of bronze and 1 blind drilled press roll including lowering and lifting equipment 1 Creping Part with 1 oscillating creping doctor, make KADANT-JOHNSON Conformatic and 2 cleaning doctors, 1 Yankee Dryer, 3642 mm diameter, steam pressure 7.53 bars gauge, material: high class cost iron coated with wear resistant a high-chromium alloy, type TSX with a thickness of actually 0,57 mm (on radius) 1 High-Performance Yankee-Dryer Hood, make BRUNSCHWEILER, steam fired with 12 bars steam pressure, temperature max. 160°C, including tube-type heat recovery system 1 Quality Control Scanner (QCS), make HONEYWELL-MEASUREX, type MX Open for the measuring of basis weight and moisture cross profile as well as colour. 1 Pope reel, hydraulic type, designed for winding up reel to a max. diameter of 1.5 m
1 complete PM-Drive, including drive control
1 Doubling-Rewinder with 4 unwind stands, designed for 1 – 4 layer products.
Max. rewind-diameter depending on number of layers between 1320 and 1500 mm.
Complete including drive and drive control.
Spare Parts : included as far as available Technical
Documentation : included as far as available Condition : Excellent. Machine was
fully operational when shut in October 2011. After shut down it has been
carefully cleaned and all parts sensitive to corrosion have been impregnated
with corrosion protection material
|
