|
Corrugator LHDPG –
200 m/min
Splicers:
- 5 pc. Marquip
- „Tailgrabber“ Model I
- 2 pc. with max. width: 2.5m
- 3 pc. with max. width: 2,2m and double dancer roll
Roll stands:
- 2 pc. Lucas
- 3 pc. Peters
- Max. width: 2.20m
- Max. Reel Diameter: 1,4m
Single Facers:
1. Isowa SF9
- Max. Width: 2,20m
- Flute: E
- Max. speed: 200m/min
- 2 pc. Preheater, Peters
2. Agnati GO 14
- max. width: 2,5m
- Flute: B
- Max. speed: 300 m/min
- 2 pc. Preheater
Triplex Preheater “Peters”:
- max. width: 2,2m
- not driven
- no rotating cylinders
Gluing machine “Agnati IM 14”:
- max. width: 2,45m
- double deck glueing machine
- Lower deck with contact roll
- Upper deck with shoes
Bridge:
Steel construction
- max. width:2,2m
Web Alignment
- CorrAligner E+L B200/2
- max. width: 2,2m
Double backer “Peters / SHS”:
- max. width: 2,2m
- Main drive max. speed: 200m/min
- 14 plates in 3 sections (5-5-4)
- Cast iron steam plates
- Baviera steam pumps
- Press rolls
- 3 Shortpress on 1st section
- Mühlen Sohn Belt – Aqua Ultra (app. 30m)
Ripper tape application
- 5 arms
Rotary shear “Fosber”:
- max. width: 2,45m
- order change speed: 40m/min
- knive to anvil
Slitter scorer “Fosber Compact”:
- max. width: 2,45m
- 8 knives and scores
Cut Off “Fosber Master”:
- max. width: 2,45m
- max. speed: 250 m/min
- double deck
- direct dc drives
- order change speed: 70 m/min
Down Stacker “Peters Contistack”:
- max. width: 2,5m
- max. sheet length: approx. 2m
- 2x downstacker
|
