|
|
machinery
for sale services
machinery
for sale services |
|
COMPLETE MILL,
Capacity: 150 TPD, board, coated board, CCM including liner, test liner,
kraftliner, topliner. Stock
preparation: three
complete lines. (1) Top line (30 tpd), Escher Wyss pulper 30 m3, complete with all its
accessories, Lamort coarse screening, Beloit fine screening, Lamort de-inking
line, Beloit double disc refiner 16” (2) Middle line (200 tpd), Kadant Lamort continuous pulper complete with all
its accessories, Voith turbo separator line, Kadant Lamort fine screening,
Beloit double disc refiner 24” (3) Bottom line (30 tpd), DGI conventional pulper 12 m3, Voith disc deflaker,
Beloit screen S-24, Black Clawson secondary screen, Beloit double disc refiner Board
machine: deckle:
2550 mm, trimmed 2450 mm, speed 220 m/min, gsm range: 175 – 575, major
rebuilds: 1980, 1997, 2005 and 2007. Seven formers, 1997 – 2007,
complete with LD cleaners and pressure screens First suction press (double felt): 60
kNm Second suction press (double felt):
100 kNm Third blind drilled press (double
felt): 100 kNm Fourth press (single felt): 120 kNm Drying section: Pre-drying section, 5 bar, 29
cylinders x 1.500 mm. MG cylinder, 3 bar, 1 cylinder x
4.500 mm. Post-drying section, 5 bar, 19
cylinders x 1.500 mm. Closed hood with recovery system Calender: 2 rolls, Nip pressure: 30
kNm Coating: Cellier coating kitchen 1 Champion with pressure filter 1 Bachofen Meir air knife with
pressure filter 1 Baschofen Meir barflex with
pressure filter 1 Champion with vibrating filter 32 Krieger infrared rows by gas Pope reel: Max. diam. of reel: 2,20
m. DCS: Siemens. Fibre recovery: 2 Kroftas. Plant Electrical consumption: 0.600
kWh/t, Steam consumption: 2.1 ton steam/t, Installation electrical 380 V: 10.500
kW, Steam boiler: 20 ton/h, Water consumption: 20 m3/t, Waste paper consumption:
200 tpd, Coating consumption: 32 tpd, Gas: 25.000 Nm3/day, Fuel-oil 1: 95 tpd
|
