machinery for sale  services  machinery wanted  special offers  contacts  home  

 

2700 mm BLACK CLAWSON tissue machine, capacity: 55 TPD, from 17 to 50 gsm at pope, maximum speed: 800 m/min.

Scope of suppply:

PRESSURE SCREENS

    1. 2 units of Selectifier 24 PH by Black Clawson.
    2. Working with only one unit. The other one is on spare.

PAPER MACHINE

  1.HEADBOX

    1. Black Clawson. Type: Hydro Flow-240
    2. Lip width: 3000 mm
    3. With 22  micrometric screws for regulating the transversal profile (manual)
    4. Air cushion type with 3 rectifier rolls.
    5. Top lip with manual opening.

  2.Fourdrinier WIRE BY Talleres Gorostidi

a.      With 10 ceramic foils.

b.      With one vacufoil (plastic)

c.      With one suction box. (there are two more as spares) (plastic)

d.      Wire dimensions: 21770 x 3100 mm

 

3.1ST PRESS

h. Suction press (bottom)

  i.      Crowning             0.90 mm

 ii.      Face                   3340 mm

 iii.      Diam.                680 mm

 iv.      Holes                 3.5 mm

v.      With one spare shell

    1. Top roll

                                                               i.      Crowning           0.80 mm

                                                             ii.      Face                 3150 mm

                                                            iii.      Diam.                565 mm

                                                            iv.      Plain roll, rubber covered

                                                              v.      1 Complete set on spare.

4. 2ND PRESS – blind drilled roll against yankee

    1. Crowning            2.00 mm
    2. Face                  3150 mm
    3. Diam.                 590 mm
    4. Holes                  2.8 mm

5. 3RD PRESS:

Blind drilled roll, against yankee cylinder the same as second press.

One spare roll for both positions.

From these three rolls, only one is for sale.

5.FELT CIRCUIT

    1. Top felt of 28500 x 2880 mm
    2. Bottom felt of  19000 x 3100 mm

  6.Yankee CYLINDER

    1. Flat inner surface.
    2. Metalized with Alphatek
    3. Face                        2910 mm
    4. Diam.                        3177,5 mm
    5. Max. working pressure: 6.2 kg/cm2 rated ASME.
    6. With condensate extracting system, condensate pumps, flash tanks, thermocompressor, steam regulating valves.

  7.POPE REEL

    1. Face of drum                        2950 mm
    2. Drum diam.                        1050 mm
    3. With rope throat
    4. Max. reel diam.            1600 mm
    5. 5 Machine spools with carton core fixing of 202 mm
4 Machine spools with carton core fixing of 76 mm.