|
|
machinery
for sale services
machinery
for sale services |
|
8455 mm paper machine, speed
1524 m/min, capacity is 779 t/day, designed for 825 t/day at 100% efficiency,
original manufacture was Beloit and installed in 1988. Production was newsprint and coated ground wood. Basement designed machine. Major rebuild in 2001 and 2003. Flowbox Metso
dilution control flowbox, slice width 9060 mm with 60 mm dilution zones from
2001. Top
former was is a Metso Optiformer design in 2001. 9200 mm wire width. Press
section Valmet
press section year 2001, wire width 9200mm, design speed 1585 m/min, drive speed
1524 m/min, paper grade LWC. First
press loadings 500 pli Second
press loadings 550 pli Third
press loadings 5100 pli/1000 Kn Dryers
first section single tier dryers operating 75 psi, temp 450Deg.F and 32F at 30
psi, diameter 1905mm, A/F bearings, steam feed from front and condensate
collected at the rear. Auto lub system. The second and third sections are two
tier dryers. The dryer drive is silent type. 40 drying cylinders with seven
drive sections. Dryers
are: 9 in first section, 10 in second section and 8 in last section Fibron
tail feed system from dryer to calender Calender:
Metso 8 roll Optiload online supercalender year 2001 Reel up:
Beloit rebuilt with secondary arm centre - wind assist year 2001. Metso xDi
gauging and DCS systems with Parsytec Web Inspection System. All 2001
manufacture. DCS, QCS
and WIS The
machine has a sectional electric drive comprising: Rewinder:
Metso Winbelt year 1988 and re - installed and rebuilt in 2001. Design speed
2500 m/min. Operating width 8530mm, unwind with brake generator, twenty driven
slitters, shaftless rewind, reel ejection and lowering table. Twin motor drive,
chute for core in feed. Rejected
complete rolls go to floor conveyor feeding the Lamb roll wrapper via conveyor
and roll lift.
|
