|
Paper
Converting and Handling Equipment
Sheet
Cutters
| 6201 |
 |
Masson
Scott DR3W double rotary sheet cutter,
6 off shaftless backstands with newly refurbished Wichita air brake
systems, 3 off electronic tension control, 3 off Mount Hope pneumatic
tension control, quick changeover chucks. Double rotary cross cut knife, 4
top knives, Reject gate and sheet overlap sections, Auto stack change
system, M&Y trim system to central baler. Dimensioning: Core dia
70/76/152mm core, Min backstand width 600 mm x 5; 730 mm x 1. Max reel dia
1,500mm. Max reel width 1,480 mm. Min chop length 535 mm. Max chop length
1,600 mm. Slit minimum 430 mm. Slit maximum 1,400 mm. Sheet load under
knife up to 500 gsm
.
|
| 6205 |
 |
Jagenberg
Convo 16 Sheeter
,
Working width 400-1600mm. Maximum 600 gsm under knife. Maximum speed 250
m/min. Cutting length 450mm-1600mm. 4 shaftless unwinds with hydraulic
reel loading, brakes with auto tension control. A range of shaftless
chucks. Year 1972. Dead knife cut, belt feed and belt overlap, no reject
gate, counter and taber, chain pile layboy for max load 4000 kg. |
| 6202 |
 |
Jagenberg
sheeter: synchro AS16, 430-1600mm
width, speed 250 m/min, 550 to 2000mm sheet length, year 1999, rebuilt
2006, two x 8 roll shaftless unwinds with crane roll loading, disc brakes
with tension control, edge guide, de curling unit, three slitters, reject
gate, number 30-72547, 220v, ream counter and taber, auto pallet
changeover. |
| 6209 |
 |
Jagenberg
sheeter, synchro
AS16, year 1978, 8 roll shaftless unwind, crane loaded reels, disc
brakes with tension control, edge guide, decurling unit, three slitters,
reject gate, counter and tabers, auto pallet change. |
| 6207 |
 |
Jagenberg
sheeter:
synchro AS16, year 1980, 8 roll shaftless unwind, crane loaded
reels, disc brakes with tension control, edge guide, decurling unit, three
slitters, reject gate, counter and tabers, auto pallet change. |
| 6203 |
 |
Strachan
and Henshaw dead knife sheeter:
year 1997, 4 roll shaftless pick up with disc brakes and tension control,
de curling unit, edge guide, three slitters, reject gate, 500 gsm knife
loading, speed 320 m/min, sheet width 250 mm to 1200 mm, length 300 mm to
1500 mm. |
| 6208 |
 |
Sheeter
Strachan and Hendshaw synchro
sheeter model SH1700, max. Knife load 700 gsm, max sheet width 1650 mm,4
roll floor pick up shaftless unwinds for 1524 mm diameter, core size
70,76 and 152mm, max reel weight 2000 kgs., pneumatic brakes with
tension control, three slitters, shynchro cut, vacuum belt overlap with
reject gate, chain pile layboy with three dividers, two tape inserters and
chain pile layboy. Max sheet length 1600 mm and min sheet length 495 mm.
max sheets in layboy three.
|
Wrapping
Lines
| 6244 |
 |
Lamb
reel wrapping and palletising line
with routes for either reels without pallets or palletised and strapped.
Commissioned 2006. Bar code reel ID system for auto selection of reel
wrapping and palletising need. Reel wrapping system is radial film
wrapping with end discs. End discs cut to size and placed on reel ends for
wrapping automatically. Auto print and application of A3 or A5 belly
labels and A5 end labels. Auto selection and transfer of pallet if
required. Pack collation on to pallets if required. Reel upending and
transfer systems. Manual addition of pallet top boards. Auto transfer and
strapping (2 way) of pallets. Clamp truck pick up for reels or fork truck
pick up for pallets. Wrap specifications: Reel size 500 – 1500 mm dia.
Min width 200 mm. Max width 2500 mm. Max weight 3000kg. Reel wrap design
capacity. Max instantaneous design 80/h. Typical average rate 50/h. 4 disc
magazines. Pallet feeding: Max 30 pallets/hr, 4 pallet magazines. Max
pallet 1200 x 1200 mm. Min pallet 650 x 650 mm. |
| 6240 |
|
Bulk
wrapping line,
1996 – 2006, Wrap system by Thimon, Strap system by Itipak. Floor
level infeed loading with lift table to conveyor height. Supplied by ELCO
in 2006. Set of pallet transfer conveyors through system. Top sheet
dispensing unit. Sheet wrap around and sealing unit. Electric heated
shrink wrap oven. Itipak strapping unit with turning for 2 way
strapping. Shrink oven capacity Width 1,300 mm x length 1,600mm x height
1,600mm. Max pallet width to strapper 1,300mm. Max pallet width final
discharge 1,230 mm.
|
| 6243 |
|
Wrapmatic
GRM ream wrapper.
Pallet infeed section with used pallet discharge and stacking. Wrapping
material carousel with 4 reel stations and trim knives. Ream wrapping and
transport modules, with Nordson hot melt glue system. On machine Logopak
ream labeller linked to mill order specification system. Palletising and
pallet discharge section. Destacker for empty pallet feed. Floor level
discharge for pallet truck operation.. Control system upgrade 2003.
Partial guarding and safety system improvements 2006. 15 reams/minute
design. Max ream 1,100 x 1,400mm. Min ream size 430 x 535mm. Ream weight
max 40kg. Max pallet weight 1,800kg. Wrapper reel max dia 1,000mm, width.
650 to 1,600mm. Wrap material: Kraft, poly coated, waxed paper etc.
|
| 6241 |
|
Reel Wrapping Line BUMA 29200. Paper roll dia. min/max 350/1500 mm.
Paper roll width min/max 240/2400 mm. Paper roll weight max: 3000 kg.
|
| 6249 |
|
Lamb
Reel
Wrapper
year 1987,
450 rolls per shift, paper wrap from five roll magazine with disc brakes.
Feed is from the paper machine house which has a roll lifter feeding ramp
with roll brake: roll travels sideways and is then lifted to operational
height. Roll pusher into wrapping and crimping unit, labeller for printing
labels, roll pusher to end heaters, roll pusher to outlet conveyor which
also has turntable. Roll upender on conveyor in roll store. Unit has a
self contained power pack.
|
| 6247 |
|
Buma
Palpa Actipak Pallet wrapping line, model VBKU, year 2003, for
pallet wrapping in plastic shrink wrap, infeed conveyor from automatic
pallet truck, lift table from ground height to infeed conveyor, robot arm
for taking printed labels onto pallets. Pallet sizes: length 500 to
1900mm, width 660 to 1400mm and height 450 to 1800 mm. Production 55
pallets per hour. Electric oven for shrink-wrapping. Exit conveyor to
storage area.
|
| 6242 |
|
Wrapmatic
Folio Wrapper,
model GRV, 380 v, 50 cycles, year 1978, new Nordson hot melt gluing, 15
reams/ min production, ream size 420mm to 920mm and 530mm to 1300mm,
height 12mm to 80mm, four paper wrap roll cartridge, manual feed with
pallet lifter and feed station, collection by twin accept layboys with
auto pallet change over.
|
Guillotines
| 6161 |
 |
Schneider
155MC Guillotine. Original year of
manufacture 1986 refurbished in 2007, Schneider destacking and restacking
tables. Area guarding and safety systems upgrade as part of installation
2007. |
| 6160 |
 |
Polar
guillotine model ED92, width 920mm, air float table and light
guarding and power back fence. Year 2000. |
| 6164 |
 |
Como
guillotine:
model 115MC-C, No.3371, light guarding, airfloat table, power back fence,
1150 mm width x 1200 mm depth. |
| 6162 |
 |
Super
Como guillotine:
model 65, Celonic control, No 2690, light guarding, airfloat table, power
back fence, auto load and de stacking tables. |
Coaters
Printers
Super
Calenders
Contact
us for more details: info@karton-ru.com
|
