|
Stock
Preparation Equipment
Complete
Stock Preparation Lines
| 6101 |
 |
Stock
preparation line with de-inking plant, capacity 280 TPD, consisting
of: Lamort HC pulper with Lamort Poire model three. Three Lamort de-inking
cells, Lamort SP vertical pressure screens in three stages. Celleco LD
cleaners. Washing by two Kvaener drum washers, Three Thune screw presses
model SP45SL, tow with gearbox drives and one with a hydraulic drive.
Water recovery by a Krofta 24 mtrs diameter. Further four off Thune SP45SL
screw presses. Sludge presses four off by Sernagiottio approx 3 mtrs with
Sludge screw press by Andritz. Two Jylhavara DS 250 Fiberiser deflakers.
Complete installation with pipes, valves, pumps, controls and periphery
equipment. Stopped recently, in line. |
| 6105 |
 |
Stock
preparation line with de-inking plant, capacity 320 TPD, consisting of: Lamort HC Pulper with Poire Model 3,
four Lamort de-ink cells, Lamort
CH screens primary and secondary with Lamort Tertiary screens. Celleco LD
cleaners. Washing/Thickening by four Holder Pamac drum thickeners.
Complete installation with pipes, valves, pumps, controls and periphery
equipment. Stopped recently, in line. |
| 6106 |
 |
Modern Stock Preparation Line with de-inking and hot
dispersion systems, installed in 1995, 345 TPD, consisting of: 18 m3 Lamort pulper with
Lamort Poire Model 3, two Lamort Gyroclean units, Lamort Hot dispersion
system; Two stage screening and Tertiary stage, Lamort screens CH5 in
primary and secondary screening. Two Kvaener Drum washers, two Andritz
belt presses, Lamort LD
cleaners, two Kroftas: one 14m diameter and other 18 m diameter. One
Krofta with sludge density control. The line is installed and is in line,
complete with all the pipes, valves, flow meters, controls, electrical
panels, cables etc. |
De-inking
Plants
Pulpers
Contact
us for more details: info@karton-ru.com
Turboseparators
Contact
us for more details: info@karton-ru.com
Screens
| 6140 |
 |
LAMORT
Pressure Screen Type SPN12, horizontal type, slotted basket
0,25 mm complete with drive set and motor, year 1992. |
| 6129 |
 |
LAMORT
Pressure Screen Type CH7, horizontal type, slotted basket 0,25 mm complete
with drive set, year 1992. |
| 6138 |
 |
Voith
primary screen model GR 21 with
motor, 7Y-HAD250, 75 kW, 1475 rpm. Stainless steel. Year 1995,
perforated basket 1.6 mm holes. |
| 6131 |
 |
Voith
VSI pressure screen, slots 0.3 mm,
capacity 150 TPD, complete with motor, 55 kW. |
| 6130 |
 |
Black
Clawson pressure screen, slots 0.3 mm,
capacity 120 TPD, complete with motor, 30 kW |
| 6134 |
 |
Black
Clawson Miami 24PB pressure screen, slots 0.3 mm,
capacity 120 TPD, complete with motor, 30 kW. |
| 6139 |
 |
Finckh
Size 1 Pressure Screen.
The flow with the slotted basket 0,40 mm is aprox. 2500 – 3500 lpm at 1%
stock consistency. Capacity is 40-50 tpd. The screen basket surface is 1,1
m2. Condition: inside pretty good, nice screen basket and rotor, no
problem with the body and the rubber lining. |
| 6132 |
 |
Inclined
raked screen, Manufacturer: Biwater, Model: Infrascreen
27214, Year of Manufacture: 1994, Design Capacity: 2.5 m3/hr Max Volume,
Installed Power: 5.5 kw. |
| 6133 |
 |
LAMORT
Pressure Screen Type CH7, horizontal type, for 120 tpd, slotted basket
0,25 mm complete with drive set and motor 55 kW complete made from
stainless steel, ready to be operated also as a fractionator, year 1983,
documentation available, basket and step rotor in good shape. |
| 6136 |
 |
VOITH
Centrosorter Sz. 10, for approx. 50- 120 tpd, ca. 3,5% stock consistency,
step rotor, basket like new with holes Ø 1,6mm, in very good condition
machine all in stainless steel, inlet and outlet flange DN150mm, bare unit
available with machine pulley equipped with step rotor for middle
consistencies up to 4%. |
| 6135 |
 |
Inclined
screen,
Manufacturer: Vickery Bauer, Model: Hydrasieve, Design Capacity:
2.5 m2 Screen area. |
| 6137 |
 |
VOITH
Minisorter Sz. 10, ready for 50 tpd, all stainless steel, screen basket
0,45mm, 9-wing rotor drive motor 11kW included. |
Contact
us for more details: info@karton-ru.com
Cleaners
Contact
us for more details: info@karton-ru.com
Refiners,
Deflakers
Tanks
| 6150 |
 |
Thick stock tank, Year of Manufacture: 1990, Design Capacity: 34
m3, incl. 1 Thick Stock Pump, Manufacturer: ABS, Model: BA
200/200-40, Year of Manufacture: 2008, Design Capacity: 800 m3/h,
Installed Power: 32 kw. |
| 6152 |
 |
Thin Stock Tank, Year of Manufacture: 1990, Design Capacity: 34
m3 incl. Thin Stock Pumps, Manufacturer: Abs, Model: 150/150-32,
Year of Manufacture: 2008, Design Capacity: 500 m3/h, Installed Power: 22
kw/h. |
| 6153 |
 |
Clarified Water Tank, Manufacturer: Krofta, Design Capacity: 40 m3/h
incl. 1 Clarified water pump, Manufacturer: Abs, Model: 150/150-32,
Year of Manufacture: 1995, Design Capacity: 500 m3/h, Installed Power:
30kw and 1 Sludge Pump, Manufacturer: Abs, Model: 150/150-32, Year
of Manufacture: 1995, Design, Capacity: 500 m3/h, Installed Power: 22 kw |
Contact
us for more details: info@karton-ru.com
|
