machinery for sale  services  machinery wanted  special offers  contacts  home  

Modern Stock Preparation Line with de-inking and hot dispersion plants installed in 1995, 345 TPD, consisting of:

Pulper: Lamort 40 m³ H.C. numberRDL24AS,  3625 X 950 mm with gearbox drive.

The rejects to a Lamort Poire model 3 with hole size 6 mm. Rejects to external conveyor.

Vickery drain rake 500mm width, stainless body with plastic slots.

Two HD cleaners:. Lamort manufacture with pneumatic dump valves.

Primary screens: two Lamort screens model SPM12 with 1.5 mm holes.

Secondary screens: three Lamort CH7 screens with hole /slot size ------

Lamort de inking cells fully enclosed model MAG : four cells in stainless.

Sludge tower: concrete construction located outside.

Two Lamort Gyrocleans model GR3.

L.D. cleaners thought to be Voith manufacture.

Tertiary screen: Lamort SPN400 with a slotted basket.

Kaevaener disc filter with 15 discs, plastic covered segments. One further position for another set of discs currently blanked off. Construction stainless steel.

Wire press number one: make Andritz and width 3.5m.

Lamort Diablo reject screen model one.

Cellwood Krima dispersion system model 710, two vertical thickening screws, heating screw, feeder screw and dispersion unit model 710 with controls.

Krofta supercell 11m diameter in stainless with sudge density meter. DAF 1.

Lamort Trommel in stainless.

Lamort CH screen model CH2 with a slotted basket.

Bleach tower located next to the dispersion unit for Peroxide bleaching; feed screw from the dispersion unit to the top of the tower.

Bleaching tank stainless steel.

Two Lamort floatation cells: model MAC cells and two further cells.

Two drum washers: make Kavener Hymac in stainless steel.

Wire press number 2: Andritz manufacture model 3050mm width.

Two post floatation cells: Lamort model MAC cells in stainless steel.

Krofta DAF 2 14m diameter in stainless.

DIP 3 basement and switch rooms.

In the mill is a spare part complete MAX cell by Lamort.

External:

Sulphuric acid tank.

Stainless steel DAF clarified water tank approx 10m diameter.

Stainless steel tank with conical base.

Various screws for the dispersion plant.

Nash ML 2004 vacuum pump.

Front side of mill has a Nash CL 4001 pump, advised as reconditioned.

Lamort CH7

Fibre glass tank with top mixer 2m x 2m.

Beloit Centrisorter body.

Two stainless chests.

White water tower tank.

Dump tank.

Pressure vessel for DAF 2 18m diameter.